Bowell snow blade snow plow with pendulum compensation - various adapters for tractor and wheel loader available - PU scraper - available in 160/180/200/220/240cm

Snow-Plow and clearing blade with pendulum compensation - working width up to 240cm

Snow Balde with hydraulic angle adjustment for small and medium size tractors with 20 to 60HP with a wide selection of mounting adapters like Cat I / Cat II front or rear 3-point hitch mounting, Euro front loader and many wheel loader and skid steeer adapters

The Bowell SP snow ploughs comply with all safety regulations and are CE tested following the 2006/42/EC machine directive.

➤ For tractors and wheel loaders with various adapter versions
➤ For tractors up to 60 HP

Free Shipping ✓











 

✅ weatherproof and corrosion-resistant powder coating
✅ hydraulic side shift of up to 25°
✅ optional support wheels or gliding feet
✅ storage support feet
✅ universal adapter for Euro frontloader and CAT-I + CAT-II front and rear 3-point hitch
✅ new extremely durable PU scraper

The Bowell SP-snow plough is designed for the semi professional user and can be flexibly mounted to a front or rear Cat I / Cat II 3-point-hitch or the Euro-type hitch of a tractor front loader. No expensive additional adapters needed !

The 4mm Bowell steel blade has end-to-end reinforcements and is covered with a whether and corrosion resistant powder coating in yellow orange (RAL 2000). The hydraulic 25° left and right side movement guarantee high working efficiency. The standard equipment includes a support leg for easy attachment of the snow plough to a wheel loader or tractor. Optionally, the new Bowell snow plough can be fitted with continuously adjustable support wheels or skid feet.

The key functions of support wheels

• Protection of the ground and the scraper bar: Without support wheels, the snow plough would rest on the ground with its full weight, which would be problematic, particularly on uneven terrain such as cobblestones, gravel paths or uneven joints in paving slabs. The new infinitely adjustable support wheels keep the plough at a constant, adjustable height above the ground. This prevents the PU scraper edge from snagging on the ground or wearing unevenly.
• Protection of the vehicle and suspension: If a low-hanging snow plough strikes an uneven surface, a kerb or a frozen bump without being braked, this delivers a hard impact to the lifting mechanism and the towing vehicle. Support wheels partially absorb these peak loads and allow the plough to ‘glide’ more gently over obstacles.
• Consistent clearing results: Thanks to the fixed height setting, the plough remains on a stable line. It does not immediately sink deeply into slight depressions, nor does it rise uncontrollably on slight elevations. This ensures a clean and even clearing result.
• Easier handling on difficult surfaces: Support wheels are indispensable, particularly on gravel or crushed stone paths: they prevent the blade from completely carrying away the gravel or crushed stone and scattering it in the snow. The blade effectively ‘hovers’ just a hair’s breadth above the gravel.

When are support wheels or glide feet less useful?

• On perfectly flat, sealed surfaces (such as large areas of freshly concreted or tarmacked surfaces), it is often possible to work without support wheels if the blade is lowered completely onto the surface.
• In very heavy, wet snow, the wheels can sometimes cause the blade to lift slightly if they are set too high – fine adjustment is important here.

In summary: Support wheels make snow clearance safer for the ground, easier on the equipment and ensure a much more even result, particularly on uneven terrain or gravel.
 

We from Bowell Tractor firmly believe that you will not find a better value for money hydraulic snow plough in this market segment. Please compare our product to the others in the market and we are sure you will agree.