EFGC-HFL-Series
spare parts for Bowell EFGC-HFL-Series
In case of any questions just send an email to info@bowell-tractor.com and we will help you.
Please click on the drawing to enlarge !
Connection with 2 hydraulic pipes
Connection with 3 hydraulic pipes
| 5 - EFGC135 roller | 41 - belt cover |
| 5 - EFGC155 roller | 46 - front wheel bracket |
| 5 - EFGC175 roller | 47 - bracket |
| 6 - rear roller ball bearing | 48 - wheel |
| 9 - rear roller bearing bracket L + R | 49 - spring |
| 12 - grease nipple M8x1 | 50 - bushing |
| 13 - 2026 big plate used on EFGCHFL, SP, BX52HFL etc | 51 - bushing |
| 13 - 2025 small plate used on EFGCHFL, SP, BX52HFL etc | 53 - oil seal 58x80x8 |
| 13 - 2026 small plate used on EFGCHFL, SP, BX52HFL etc | 54 - UC208 bearing, 5 holes for mounting bolts |
| 14 - rod adapter | 55 - EFGC135 rotor shaft |
| 18 - upper hitch adapter, bigger clearance version, < # 927400 | 55 - EFGC155 rotor shaft |
| 21 - connection bracket | 55 - EFGC175 rotor shaft |
| 22 - rod | 56 - 800gr forged hammer |
| 23 - linch pin | 59 - counter knife |
| 24 - skid set, L + R | 61 - Protection plate 72mm width,2mm thickness |
| 30 - hitch frame | 65 - front safety bar for EFGC135 |
| 31 - oil motor | 65 - front safety bar for EFGC155 |
| 32 - deep groove ball bearing 6005 | 65 - front safety bar for EFGC175 |
| 33 - oil motor bearing seat | 69 - oil seal 40x68x10 |
| 36 - shaft | 71 - wheel axle |
| 37 - belt BX 17x1030 | 73 - deep groove ball bearing |
| 38 - 3 belts version small pulley for EFGC135/155 | 74 - nylon bushing |
| 39 - 3 belts version upper pulley for EFGC135/155 | 75 - cover plate |
| 40 - power lock 40x65 | 76 - oil motor |
Connection with 2 hydraulic pipes
| 1 - oil motor | 14 - quick release coupling G1/2 |
| 11 - inlet pipe, > # 925000. G1/2 M30*2 | 15 - combined washer G3/8 |
| 12 - outlet pipe, > # 925000. G1/2 M18*1.5 | 16 - combined washer G3/4 |
| 13 - combined washer G1/2 | 19 - 3/8 single way valve |
Connection with 3 hydraulic pipes
| 1 - oil motor | 15 - combined washer G3/8 |
| 3 - combined washer M22 | 18 - pipe. M18*1.5 M18*1.5 |
| 5 - oil inlet pipe. M18*1.5 M18*1.5 | 19 - pipe. M18*1.5 M18*1.5 |
| 7 - pipe A. G1/2 M18*1.5 | 26 - 3/8 single way valve |
| 8 - combined washer G1/2 | 27 - 1/2 single way valve |
| 11 - pipe B. M30*2 M30*2 | 30 - combined washer M27 |
| 13 - pipe A. M30*2 M30*2 |
1 to 32 (from a total of 63)